Notes on radiant heating.
Page 2 of 3. 29 articles on how infrared heating works, what it costs to run, and what it is like to live with.
Infrared heating panels: a complete guide
The three classes of infrared panel, how to size and place them, what to check before buying, and where an embedded system beats a surface-mounted one.
Read the article →
Infrared heaters: the benefits and the drawbacks
An even-handed look at infrared heating. What it genuinely does better than a radiator or a heat pump, what it does worse, and the situations where you should choose something else.
Read the article →
Infrared heating and solar: a better match than most
A low-voltage DC heating element can run straight off solar panels or a battery with no inverter in the path. Why infrared and PV pair unusually well, and what it takes to do it properly.
Read the article →
Wall or ceiling heating: which should you choose?
Heated walls store heat and warm the lower half of a tall room; heated ceilings distribute evenly and free up wall space. How to pick between them, and what each costs to install and run.
Read the article →
PowerBoard vs standard infrared panels: what actually differs
Most infrared panels heat with a resistive wire and hang on the wall at 90 to 110 °C. PowerBoard uses a full-surface carbon-fibre film, goes into the ceiling, and runs cooler. Five differences that matter.
Read the article →
Twelve minutes a board: PowerBoard installation speed
PowerBoard infrared ceiling panels install in around twelve minutes each, fitting and electrical connection included. What that does to a construction programme against radiators or underfloor heating.
Read the article →
Can infrared heating reduce your energy bill?
Infrared heats surfaces rather than air, responds in minutes and zones room by room. Where the saving genuinely comes from, and how to work out the kilowatt hours for your own building.
Read the article →
SafeTech EGS carbon fibre heating film receives UL 2683 certification
Our mains-voltage carbon-fibre heating film is certified to UL 2683, the standard for heating elements and assemblies. What the certification tests, and why it is harder for a full-surface element.
Read the article →
PowerBoard is BEAB IEC 60335-1 certified
The PowerBoard ceiling heating system holds Intertek BEAB certification to IEC 60335-1, the international safety standard for household electrical appliances. What that certification actually covers.
Read the article →
Radiant heating and humidity: the link most people miss
Warm surfaces do not reach dew point, so they do not condense. How radiant heating keeps a house inside the 40 to 60% humidity band without a dehumidifier, and why that matters for mould and comfort.
Read the article →Send us a floor plan.We will send back a heating system.
Project data, drawings or CAD files in. A room-by-room heat loss, element layout and priced proposal out. No obligation.